On Networks N300RE User Manual - Manual (Page 26)

Extender Network Settings
26
N300RE WiFi Range Extender
The Wireless Card Access Setup screen displays a list of currently active wireless cards
and their Ethernet MAC addresses.
4. If the computer or device you want is in the Available Wireless Cards list, select that radio
button; otherwise, type a name and the MAC address.
You can usually find the MAC address on the bottom of the wireless device.
Tip: You can copy and paste the MAC addresses from the Attached Devices
screen into the MAC Address field of this screen. To do this, use each
wireless computer to join the wireless network. The computer should
then appear in the Attached Devices screen.
5. Click Add.
The screen changes back to the Wireless Card Access List screen.
6. Add each computer or device you want to allow to connect wirelessly.
7. Select the Turn Access Control On check box.
8. Click Apply.
 To edit or delete a wireless device from the access list:
1. Select Advanced.
The Advanced Wireless Settings screen displays.
2. Click the Setup Access List button.
3. In the table, select the radio button next to the wireless device that you want to edit or
delete.
4. Do one of the following:
• Click the Edit button.
The Edit Wireless Card screen displays.
a.Edit the address information.
b. Click the Accept button.
• Click the Delete button.
The address is removed from the table.