On Networks PL500 Installation Guide - Manual (Page 4)

4
Install Your Powerline Adapter
The following procedure describes how to add a
Powerline adapter to your existing Powerline
network. Repeat this procedure for each
Powerline adapter that you want to add.
 To add a Powerline adapter to your
existing Powerline network:
1 Plug your Powerline adapter into a power
outlet.
2 Set up security on your Powerline adapter to
add it to your existing Powerline network.
a
Press the Security button for 2 seconds.
b Press the Security button on one of the
other Powerline adapters in your
existing network for 2 seconds.
Both buttons must be pressed within 2
minutes.
Note: Do not press the Security button
on the Powerline adapter until installation
is complete and the adapters are
communicating with each other
(indicated by the blinking Powerline
LED). Pressing this button too soon can