Osprey AURA AG 50 - Manual (Page 8)

ATMOS / AURA SERIES 8
FEATURE DETAILS
STOW-ON-THE-GO™ TREKKING POLE ATTACHMENT
65L / 50L
Osprey's Stow-on the-Go™ trekking pole attachment is designed to
quickly attach and carry trekking poles while wearing a pack.
A Adjust the trekking poles to their minimum length.
B Locate the elasticized loop on the lower left side of pack. While
pulling the loop out from the pack, insert the basket end of the
trekking poles into the loop.
C On the left harness strap locate the trekking pole icon. Pull up on the
cord to open, place pole handles in the loop and tighten with the cord
lock to secure.
D Reverse these steps to remove the trekking poles. REMOVABLE SLEEPING PAD STRAPS
65L
Sleeping pad straps allow for quick, secure external gear attachment. They can be
fully removed to save weight.
TOOL ATTACHMENT
65L / 50L
The dual ice tool loops and clove hitch style bungee tie-offs provide secure tool
attachment and transport.
A Slide the tool shaft through the top of the ice tool loop and flip the shaft up
towards the top of the pack.
B Loosen the bungee cord lock and route the tool handle through the bungee.
Tighten the cord lock nesting it into the Y-Clip to secure the tool into place.
C Reverse to remove.
INTERNAL RESERVOIR SLEEVE
65L / 50L
An internal reservoir sleeve is located in the main body of the pack allowing easy
loading/unloading of a hydration reservoir. Placing your reservoir inside the sleeve
helps provide proper weight distribution when carrying your pack.