Osprey REVERB 10 - Manual (Page 2)

reVerB 10
reVerB 10: Backpanel access
The Reverb 10 features backpanel main
compartment access to an avalanche safety
kit featuring sleeves for probe/shovel handle/
skins and spare layers etc.
reVerB 10: Goggle Pocket
The Reverb 10 top zippered goggle pocket
features a protective heat embossed fabric
for scratch free carry with an internal
zippered slash pocket and key clip.
hydraulics™ reservoir
Add an Osprey Hydraulics™ 2 or 3 liter
hydration reservoir to your pack for stable,
efficient, on-the-go water management.
For more information, please visit your local
Osprey retailer or visit www.ospreypacks.com.
Backpanel access
Dual zippered backpanel entry into the main
compartment provides access to gear and
hydration when carrying skis or snowboards
–and keeps the backpanel, harness and
hipbelt out of the snow while gaining access.
Once inside you will find you will find a large
mouth space for your gear and a zippered
hydration compartment.
hydration
An internal zippered backpanel hydration
compartment with reservoir hanger and a
fully insulated dual zippered harness router
provide for hassle and ice free hydration.
A) Slip your reservoir into the zippered
compartment utilizing the reservoir hanger
if needed and B) route the hydration hose
through the right harness strap for on the go
water management.
reinforced Front Panel
Each Reverb Series pack features a
reinforced, padded front panel for protection
while carrying skis and snowboards.
Glove Friendly Buckles
Quick release glove friendly buckles release
quickly with thumb and forefinger providing
easy access to retained items.
Vertical Frontpanel Snowboard Carry
Reverb vertical snowboard carry utilizes a
reinforced lower strap on the front panel
of the pack and a stowable strap on the
left shoulder harness that extends across
the snowboard to the right side harness.
To use, A) Undo lower webbing strap
completely via the slider buckle and thread
the webbing from beneath the fabric overlay
to extend. B) Place the snowboard bindings
up into position and reattach the strap
over the snowboard beneath the bindings,
rethreading the webbing through the slider
buckle and tensioning to secure. C) Locate
the hidden nylon carry strap beneath the
hook and loop tab at the top of the left
harness, unclip the buckle extending the
strap to its full length over the top of the
snowboard and connect it to the female
buckle found on the right shoulder harness,
tensioning to secure. Reverse to remove.
* Snowboard carry can also be utilized to
carry snowshoes
horizontal Backpanel Snowboard Carry
A reinforced hipbelt wing provides quick
horizontal snowboard carry across the
backpanel of the pack. To use, A) place
the pack backpanel up on the ground and
position snowboard base up horizontally
across the pack’s backpanel, resting it on the
reinforced hipbelt wings with the bindings on
either side of the pack. B) Load the board and
pack onto your back tensioning the hipbelt
and harness to secure the board horizontally
between the pack’s backpanel and your pack.
Reverse to remove.
reVerB 18
reVerB 18: external Probe/
Shovel handle Sleeves
The Reverb 18 features external quick access
probe and shovel handle sleeves. To use the
shovel handle sleeve, A) locate the shovel
handle icon at the top of the sleeve on the
left side of the pack, unclip the retention
strap via the glove friendly buckle and insert
shovel handle into sleeve shaft first. B) Re-clip
the retention strap over the shovel grip and
tension for stable, secure carry. To use the
probe sleeve , A) locate the probe icon at the
top of the sleeve on the right side of the pack,
lift up the fabric flap and insert probe into
sleeve. B) Tension the elasticized cord lock
loop around the probe and tension to secure.
Reverse to remove.
reVerB 18: Front Panel access
The Reverb 18 features zippered front
panel access to an avalanche safety kit
compartment featuring sleeves for probe/
shovel handle/skins and a front zippered
pocket with internal key clip for the utmost
in organizational features.
reVerB 18: zippered Goggle Pocket
The Reverb 18’s top zippered goggle pocket
is lined with a protective heat embossed
fabric for scratch free carry.
A
B
A
B
B
C
C
A
*
A
B
A
A
B
B
uniQue FeatureS exPlained