Osprey HYDRAULICS RESERVOIR - Manual

INSERTING/REMOVING THE
HYDRAULICS™ RESERVOIR
A Undo the two load lifter buckles found at the top
of the duckbill closure flap to gain entrance into the
pack’s dedicated hydration compartment. B Grasp
the RapidFill ™ cap attachment loop at the top of the
reservoir and remove. C Use the handle/spine to
insert the reservoir back into the Hydraulics ™
compartment.
Note: The small, quick release attachment strap
is included as an option to secure non Hydraulics
™
reservoirs.
Filling the Hydraulics™ Reservoir
Grasp the handle/spine in one hand, undo the wide
mouth cap with the other hand and fill as desired.
Replace the cap ensuring the gasket is in place and
invert to test.
Note: Removing air from the reservoir after filling
with water will help prevent excess slosh. To do this,
hold reservoir upside down, pinch the bite valve and
squeeze the reservoir until all air is expelled.
AirSpeed™ Suspension
The Syncro Series Packs feature a peripheral
LightWire™ alloy frame. Mesh is stretched taut over
a ridge molded foam backpanel. This frame support
creates a lightweight and ventilated backpanel
providing excellent comfort, carry and pack to
back contact.
C
B
A A
Printed on recycled content paper
PACK CARE
Osprey recommends Nikwax ® products
for pack care. For complete instructions on cleaning your pack,
visit www.ospreypacks.com/PackTech/PackCare
Your pack is an extremely durable product built for years of use
and abuse. However, some basic procedures will ensure that
your pack holds up optimally.
• After each trip be sure to clean out your pack thoroughly.
• If it’s wet, hang it to dry.
• Loosen all the straps.
• Wash your pack every now and then.
HYDRAULICS™ RESERVOIR CARE
To clean your Osprey Hydraulics™ Reservoir we recommend
the following in conjunction with Osprey’s Hydraulics™
Reservoir Cleaning Kit containing a reservoir cleaning brush,
delivery system cleaning brush and a convenient drying rack:
• Remove the Hydraulics™ Reservoir from its compartment
prior to cleaning.
• Soak in warm, soapy water. Scrub reservoir thoroughly with
cleaning brush. Rinse and hang to dry thoroughly using drying
rack.
• Leave the cap off for drying and during storage.
• Incorporating the use of Hydraulics™ Cleaning Tablets on a regular basis
in conjunction with your cleaning kit is also very effective in cleaning your
Hydraulics™ Reservoir. Hydraulics™ Cleaning Tablets are all natural,
biodegradable and chlorine free and work with containers of all materials.
For more information, please visit www.ospreypacks.com
GUARANTEE
At Osprey, sustainability is designed into our packs, which are built to last
a lifetime and backed by a superb guarantee, no matter how hard you are on your
gear. For details, visit www.ospreypacks.com The Osprey Hydraulics
™ Reservoir is
covered by a limited 1-year warranty reflecting the reasonable lifespan of
a reservoir.
WARNING! STOP! HIGH ENERGY MAGNET! WILL STOP PACEMAKERS WHEN IN
CLOSE PROXIMITY. May be hazardous or harmful to medical implants, ATM and
credit cards, watches, compasses, mobile phones, avalanche beacons and
transceivers, electronic instruments, computer hard drives, and other magnetic
media, and may cause malfunction or damage to such items in close proximity.
Avoid use of this product in close proximity to such items. Not intended for
children.
QUESTIONS?
Contact Osprey Customer Service. Real help from
real people. Scroll over the customer service tab at
www.ospreypacks.com.
OSPREY PACKS, INC.
115 PROGRESS CIRCLE
CORTEZ, CO 81321 USA
866-284-7830
10.3V
Hydraulics TM / Syncro
Owner’s Manual
Congratulations on your purchase of an Osprey
Hydraulics
™ Syncro Series pack. Our obsession with
detail rewards you with a truly full-featured pack and
we want to be sure that you understand and utilize
your pack completely. Here’s a full tour of your pack
from the ground up.
WWW.OSPREYEUROPE.COM
www.ospreypacks.com/PackTech/OwnersManuals KR
SHARED FEATURES
HYDRAULICS™ RESERVOIR
The reservoir design features a direct welded,
anatomically shaped HydroStatic™ backer plate to
prevent barreling of the reservoir and ensure pack
fit is preserved for optimal stability and comfort .
This enables the reservoir to conform to the back’s
complex shape, even when full. The result is a more
precise, stable and comfortable fit. Additionally, the
reservoir has an integrated lightweight, low profile
handle/spine that stabilizes the load of the
water while also serving as a more convenient
design to slide the reservoir into the pack .Other
Hydraulics™ Reservoir features include:
• Metallocene PE high strength BPA, PVC , taste
and odor free material results in greater reservoir
strength and resiliency
• Anti microbial formula to prevent bacteria
and mold
• Wide mouth, ¾ turn cap opening provides quick ,
secure opening and closing for easy filling and
cleaning.
• Articulated, 180 degree on/off bite valve with
included sternum strap magnet
• Access via bite valve to delivery hose for easy
cleaning
• Dual side hose exit from the reservoir for easy
routing options
• Flexible ¼”/6.35 mm hose provides fast water
flow