Document Outline

• CBM710UMEhyoushi2.pdf
  • CONTENTS
  • 1. INTRODUCTION
    • 1. 1 Features
    • 1.2 Accessories
  • 2. TYPE CLASSIFICATIONS
  • 3. SPECIFICATIONS
    • 3.1 General Specifications
    • 3.2 Print Format
    • 3.3 Paper Specifications
  • 4. BLOCK DIAGRAM
  • 5. EXTERNAL APPEARANCE AND PARS DESCRIPTIONS
    • 5.1 CBM-710 External Appearance
    • 5.2 CBM-720 External Appearance
    • 5.3 CBM-730 External Appearance
    • 5.4 CBM-750 External Appearance
    • 5. 5 Part Descriptions
  • 6. OPERATION
    • 6. 1 Setting and Removing the Paper and Ribbon Covers
    • 6.2 Opening and Closing the Cutter Unit (CBM-720. CBM-750)
    • 6.3 Installing the Cassette Ribbon
    • 6.4 Installing and Changing the Paper
    • 6.5 Self Print Function
    • 6.6 Paper End Detector
    • 6.7 Installation of the CBM-750
  • 7. INPUT BUFFER BACK-UP FUNCTION
    • 7.1 Input Buffer Back-up
    • 7.2 Clearing the Input Buffer
  • 8. PARALLEL INTERFACE
    • 8.1 Specifications
    • 8.2 Connector Pin Assignment
    • 8.3 Description of Input/Output Signals
  • 9. SERIAL INTERFACE
    • 9.1 Specifications
    • 9.2 Connector Pin Assignment
    • 9.3 Description of Input/Output Signals
  • 10. FUNCTION SELECTION
  • 11. PRINT CONTROL FUNCTIONS
    • 11.1 Control Codes
    • 11.2 Input Data Formats
  • 12. CHARACTER CODE TABLES
  • 13. MAINTENANCE
    • 13.1 Maintenance Procedures
  • 14. EXTERNAL DIMENSIONS
    • 14.1 CBM-710
    • 14.2 CBM-720
    • 14.3 Paper Winder Unit AW-2
    • 14.4 CBM-730
    • 14.5 CBM-750