Ozone Gaming Radon Opto - Manual (Page 4)

Ozone Radon utility
The functions of 2nd to 7th buttons can be redefined. The redefined
data will be stored in the Ozone Radon hardware. When you change
between computers, you can use the same functions that you saved
in Ozone Radon without redefining or install drivers, even if you want
to use script functions.
• Keep shooting function
The keep shot function can be assigned to any button, from 2nd to
7th buttons. With this function you can set the number of shots
and the interval time of two shots.
The way to configure this setting is as follows:
1. Choose a button and select the function of “Keepshot (Mouse)” or
Keepshot (Keyboard).
2. Define an action to be emulated.
Set the shooting times from 1 to 254 or 255 for loop while held.
Set the shooting speed (F: Fast; M: Middle; S: Slow).
3. Press “Apply” to active the new settings.
• Emulating keyboard
All buttons can be assigned as a keyboard command, single
command or compound command.
The process is as follows:
1. Choose a button and select the function “Emulate keyboard”.
Fast
Middle
Slow 30 times/sec.
15 times/sec.
6 times/sec. 15 times/sec.
10 times/sec.
6 times/sec.
SPEED KEEPSHOT MOUSE KEEPSHOT KEYBOARD