Ozone Gaming Onda PRO User Manual
Page 6
B
c
6
INSTALLATION
Plug the USB connector into your PC/Notebook and the system will search the
USB device automatically:
1.
USB power supply indicator (LED) on volume control box. (This LED is
always On when in standing by mode). The LED light will flash during gaming.
When the microphone mute button is ON the LED light will be red. And when
the speaker mute is ON the LED light will be blue.
2.
Before activating the audio source turn the volume down.
3.
Put this headset on your head and adjust the headband to fit your head & Mic
tube close to your mouth.
4.
Activate the audio source and adjust the volume as necessary.
Note:
Some USB Host Controllers may have problems with data stream package loss,
this will influence output audio data and create some discontinuous sounds. However this
rarely happens. Sometimes, if you plug a USB Personal Multi-media Device on your PC
system, the OS cannot change the audio device to USB audio automatically. In this case
please switch the audio to USB sound in the audio device properties on the control panel.
If your PC system has more than one USB connection port, please remember which one
you used for installation, and the next time you plug this USB Multi-media Sound Device to
your PC, please use the same port.