Philips VRA456AT User Manual
Owner’s manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- I
- 2
- 2
- 4
- I
- 2
- 5
- 4
- 2
- 2
- Press the VCR button, then press the MENU button.
- Press the PLAY A or STOP V button to select VCR SET UP, then press the FF P^/OK button.
- 3
- 4
- Press the EXIT/STATUS button.
- Vídeo Heads
- Video Signal
- Antenna
- VHF Output Signal
- Power Requirement
- Power Consumption
- Operating Temperature
- Relative Humidity
- Weight
- Dimensions
- Tuner Broadcast Channels
- Cable TV Channels
- The VCR has no power.
- A power failure occurred.
- The VCR cannot be controlled with the remote control.
- The VCR does not respond normally to the remote control. (For example, the VCR may change channels multiple times when you press the CH(annel) A button once.)
- The VCR will not perform a timer recording.
- Tape can’t be inserted.
- Tape can’t be removed.
- The motor (cylinder) rotates even when the VCR is in Stop mode.
- There is no playback picture, or the playback picture is noisy or contains streaks.
- The Number buttons won’t work for channels above 69; channels above 13 cannot be received.
- TV programs cannot be watched normally.
- Line Input mode is selected.
- Multi-Channel Television Sound System (VRA656 only)
- The VCR ejects the tape when the REC(ord)/OTR button is pressed or when the VCR power is
- The remote control is not available or the remote control will not access the VCR’s on-screen
- menu.