Canon DCD CAMCORDER - Manual (Page 43)

43
Advance
d
Fun
c
tio
ns
More
Recor
ding
Op
tio
ns
E
Changing the Autofocus Mode
You can change the AF (autofocus) frame selection mode.
To change the operating mode, refer to About the Operating Modes ( 9).
Options
* Except for the [ FIREWORKS] recording program.
Select ( ) the autofocus mode.
9 Point AiAF
Mode switch:
*
Depending on the shooting conditions, one or more AF
frames out of the nine frames available are automatically
selected and focused on.
Four framing corners will appear on the screen when making
the selection; the corners do not appear while actually
recording.
Center point
Mode switch:
*
The center AF frame is selected to focus. This is convenient
for making sure the focus is exactly where you want it.
A single focusing frame appears in the center of the screen
when making the selection; the frame will appear also while
actually recording.