Cooler Master XCraft 250 - Manual (Page 6)

5
SOFTWARE INSTALLATION
X Craft 250 Press & Go easy backup system only works under Window
XP/2000/98/ME
Please refer to the attached CD for following software installation steps.
* The backup system is provided without any guarantee against any data loss
and/or damage when using it.
z If the auto-run program does not start automatically, please start the
installation program with following steps.
Step1. Double click on “My computer”
Step2. Double click the CD driver icon.
Step3. Double click on the “install’ icon and follow the instruction.
Q&A
Q.) T he HDD power could not be launched and I hear the noises always.
What could I do?
A.) The main difference between e-SATA external hard drive enclosure
and common external hard drive enclosure is that eSATA cable does
not include a power connector. Connect the USB cable to computer
for power supply, and then connect the e-SATA cable and start to use.
Q.) Why I cannot see/use the removable disk drive after installed and
connected the external hard drive enclosure to my computer
successfully?
A.) Ensure that the HDD has been formatted.
Q.) Why my computer can not indicate the HDD location while using USB
connector to transmit data?
A.) Insufficient power supply provided by USB maybe, connects the
other USB connector of USB Y cable to the computer to increase the
power supply. Furthermore, when USB cable and SATA cable connect
to the computer simultaneously, the SATA function will work
preferentially then USB. Please disconnect the SATA connector from
eSATA cable, If you want to use USB function to transmit data.