Cooper Lighting ADY080112 - Manual

(x2)
Pan head screws
Additional bracing/ structure may be required to support fixture.
(x4)
(by others)
Appropriate fasteners
Attention:
Exploded View and Part Call-out
Integral Shroud
(wedge)
J-box gasket
Mounting plate
J-box
(by others)
Fixture and ballast
assembly
Preparing Fixture for Mounting
#10-32 x 1/2"
#10-32 x 1/2"
Pan head screws
(x3)
Installing Mounting Plate
mounting plate over j-box using appropriate
Gasket
Using dimensions provided on page 3, install
fasteners(by others).
J-box
(by others)
2. Ensure gasket seals J-box.
1.
Mounting
plate
‘ŠȱŠ••ȱœ˜ž›ŒŽœȱ˜ȱ™˜ Ž›ȱŠ›Žȱž›—Žȱ˜ǯȱȱ ••ȱ
˜›”ȱ–žœȱ–ŽŽȱ•˜ŒŠ•Ȧ—Š’˜—Š•ȱŒ˜ŽœȱŠ—ȱ‹Žȱ
‘ŽŽȱŗȱ˜ȱř
Ř
ADY080112 REV A(ECN080444)
DZȱȱ Ž˜›ŽȱœŠ›’—ȱŠ—¢ȱ ˜›”ȱŽ—œž›Žȱ
™Ž›˜›–Žȱ‹¢ȱŠȱŒŽ›’’ŽȱŽ•ŽŒ›’Œ’Š—ǯ
—œŠ••Š’˜—ȱ —œ›žŒ’˜—œ
ŽŽȱ‘›˜žȱŖŗ ˜ž—ȱ‘›˜žȱŖŘ šžŠ›Žȱ‘›˜žȱŖř
‘ŽœŽȱ’—œŠ••Š’˜—ȱ’—œ›žŒ’˜—œȱŸŠ•’ȱ ’‘ȱ‘ŽȱŠ‹˜ŸŽȱ –Ž›’¡ȱœ¢•Žœǯ
ŗ
Š›—’—
22 1/2"
Large, OUTDOOR
SSIxx
(Shroud, Integral)
#10-32 x 1/2"
(x3)
Pan head screws
safe place.
Pull fixture from mounting plate and store in a 3.
enclosure.
x 1/2" Pan head screws from behind ballast
#10-32 x 1/2"
Pan head screws
(x2)
1. To mount fixture, begin by removing both #10-32
x 5/8" pan head screws and remove shroud.
2. While supporting fixture, remove all three #10-32
Ballast
enclosure