COBY electronic TF-TV3207 - Manual (Page 18)

Page 1 Coby Electronics Corporation www.cobyusa.com Page 1 www.cobyusa.com Page 1
TV FUNCTION
Basic Operation
Prepare the antenna and power connections (see the Getting Started section for details).
Press to turn the TV on.
Set your TV to the display the desired signal.
Press to change between Digital TV tuning (ATSC) or Analog TV tuning (NTSC).
Press to change between AV Input or Output modes (Component 1, Component
2, AV Out, etc.). You should see the desired signal on-screen.
Press or to change the channel, or use the numeric keypad on the remote
control to input a channel number directly.
Prior to viewing over-the-air or cable/satellite television, it is recommended that you set
the television to auto-scan for available station channels. To auto-scan, press to
enter the System Setup Menu, and then select “Channel > Auto Program”.
System Setup Menu
Access the System Setup Menu to adjust the inter-
nal options and features of your TV.
Press . The System Setup Menu will
appear on-screen.
Use the Navigation keypad ( or ) to
select a setup menu category. Press to
enter the selected setup menu.
With a setup menu, press or to
select (highlight) a desired option. Press
to confirm the selection.
Press or to adjust an option.
Press to return to a previous menu and to exit the System Setup Menu.
Picture Options Menu
Item Description
Mode Select a Picture Mode preset (User, Standard, Movie, Sports)
Brightness Adjust the brightness of the display.
Contrast Adjust the contrast of the display.
Saturation Adjust the color saturation of the display.
Tint Adjust the tint of the display.
Sharpness ATV Mode only: Adjust the sharpness of the display.
Noise Reduce
ATV Mode only: Select the Noise Reduction mode (Off, Lower,
Middle, Strong).
Color Temp. Adjust the color temperature of the display.
1.
2.
3.
•
•
4.
1.
2.
•
•
3.