Casio EXILIM EX-Z300 - Manual (Page 24)

24
Snapshot Tutorial
Snapshot Tutorial
The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
2.
Use [8] and [2] to select the setting you want to change.
* Image quality cannot be changed using the Control Panel.
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You can configure the camera to turn off display of the Control Panel when you
press [SET] (page 126).
• You also can configure settings other than those listed above (page 61).
• The Control Panel cannot be displayed while a Prerecord Movie, For YouTube, or
Voice Recording Operation is in progress.
Using the Control Panel
1
9
5
3
4
7
8
2
6
[SET]
Control Panel Available settings
[8] [2] [4] [6]
1 Image size/Quality* (pages 25, 74)
2 Flash (page 28)
3 Auto Shutter (page 30)
4 Auto Shutter trigger sensitivity
(page 32)
5 ISO sensitivity (page 41)
6 Continuous shutter (page 39)
7 Face recognition/Make-up
(pages 34, 46)
8 EV shift (page 42)
9 Date/Time (page 43)