Compex Systems IWAVEPORT WL11A+ - Manual (Page 41)

Chapter 5 TCP/IP Configuration
34
Chapter 5 TCP/IP Configuration
This chapter discusses the configuration of your TCP/IP connection of your Compex
WL11A+.
Upon the successful installation of the Compex WL11A+, the Compex WL11A+
network adapter will be added to your network folder. To configure TCP/IP
connection settings for the Compex WL11A+, please follow the steps listed below. If
you are using Windows 2000/XP, please go to section 5.2.
5.1
Adding TCP/IP network protocol for Windows 98/98SE/ME
1.
From the Windows 98/98SE/ME Start Button, select Settings, and then
Control Panel.
2.
Double-click on the Network icon and a Network screen will appear as
shown in Figure 5.1a.
Figure 5.1a Network Configuration