Canon C2550 - Manual (Page 229)

Index 8-57
8
Appe
ndi
x
NTP Server Address, 8-7
NTP Server Check, 8-7
Polling Interval, 8-7
Use SNTP, 8-7
Solaris, 3-49
Specifications, 8-27
Hardware, 8-27
Software, 8-27
Spool, 2-15, 3-47, 3-49, 8-44
Spooling, 3-49
SSL , 8-44
SSL encryption, 8-44
Stamp, 8-44
Standard, 8-44
Startup time, 8-44
Startup Time Settings, 3-42, 8-18
Subaddress, 8-45
Subaddress Books, 8-45
Subnet, 8-45
Subnet Mask, 3-4, 8-3, 8-45
Super Fine, 8-45
Super G3, 8-45
Switching hub, 3-18, 3-42, 8-45
T
TCP/IP, 1-10, 1-11, 8-27, 8-46
TCP/IP client software, 5-6
TCP/IP network, 1-4, 3-2, 3-43, 5-6
TCP/IP Settings, 8-3
Apply Settings, 3-13, 8-3
BOOTP, 3-4, 8-3
Certificate Settings, 8-9, 8-10
Dept. ID Management Password Confirmation,
8-13
DHCP, 3-4, 8-3
DNS Dynamic Update, 3-6, 8-6
DNS Host Name/Domain Name Settings, 8-6
DNS Server Address Settings, 8-5
DNS Settings, 3-5, 8-5
Domain Name, 8-6
First Address, 3-15
FTP Print Settings, 3-9, 8-8
Gateway Address, 3-4, 8-3
Host Name, 8-6
IP Address, 8-3
IP Address Range Settings, 8-3
IP Address Settings, 8-3
IPP Print Settings, 3-10, 8-8
IPv4 Settings, 8-3
IPv6 Settings, 8-4
Last Address, 3-15
LPD Banner Page, 3-7, 8-7
LPD Print Settings, 3-7
Multicast Disovery, 8-9
Multiple Addresses, 3-15
Node Type, 8-7
Permit IPv4 Address, 3-13, 8-3
Permitted Receiving MAC Address Settings,
8-13
PING Command, 3-17, 8-3
Port Number, 3-12, 8-12
Primary DNS Server, 8-5
Proxy Settings, 3-12, 8-12
RARP, 3-4, 8-3
RAW Print Settings, 3-8, 8-7
Reject IPv4 Address, 3-13, 8-3
RX/Print Range, 3-13, 8-3
Scope ID, 8-7
Secondary DNS Server, 8-5
Server Address, 3-12, 8-12
Setting/Browsing Range, 3-14, 8-3
SNTP Settings, 8-7
Subnet Mask, 3-4, 8-3
Use HTTP, 3-12, 8-12
Use Multicast Discovery, 8-8
Use PASV Mode for FTP, 8-8
Use Proxy, 8-12