Canon A50 - Manual (Page 91)

91
Other Functions
6. Play images using the normal proce-
dures.
7. When you finish viewing, turn the
camera Mode Dial to the L (Lock)
position before disconnecting the cable
from both devices.
• When you are using the +/- buttons to
switch images, the display resolution
will drop slightly until the next image
appears.
Due to different video signals in other countries,
the images may not display on the TV screen even
when connected.
If the Clock Not Set icon ( ) flashes on the
Display Panel, it means that the button battery
charge is low and the date/time setting has
been lost. Purchase a generic CR2016 lithium
battery and exchange it for the spent battery
with the following procedures.
• The button battery is pre-installed at
the factory and may therefore expire
earlier than its rated lifespan after the
camera has been purchased.
• The Clock Not Set icon will continue to
flash on the Display Panel until you set
the date/time, even if you have changed
the button battery. Always set the date/
time after changing the button battery.
(p. 29)
Changing the Button Battery