COBY electronic NBPC1220 - Manual (Page 19)

Page 18 Coby Electronics Corporation www.cobyusa.com Page 19
External Devices
Your computer includes multiple connection ports for maximum perfor-
mance and productivity.
Do not connect or disconnect any external device cables other than
USB cables while the computer power is on. To avoid possible damage
to attached devices, wait at least five seconds after the computer is shut
down to disconnect external devices.
Connecting a Universal Serial Bus (USB) Device
Your computer comes with three Universal Serial Bus Ports compatible
with USB 2.0 or USB 1.1 devices such as a keyboard, mouse, camera, hard
disk drive, printer, and scanner. USB devices may be connected and
disconnected without rebooting the computer (hot swapping), and al-
low specific classes of hardware to be used without requiring individual
device drivers to be installed.
When using a high power consumption USB device such as a
USB HDD, use an external device power adapter to avoid system
damage.
Connecting an External Display
You can connect a VGA monitor via the computer’s built-in VGA port.
To connect a VGA monitor, plug the 15-pin display cable into the corre-
sponding VGA port on your computer.
To shift to other connected display devices, press Fn + F5. You may also
select a device using the Control Panel > Display menu.
Connecting an Audio Device