Clarion DB456MC - Manual (Page 13)

280-8138-00
DB456MC
15
English
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WMA
type, the CD cannot be played normally in some
cases.
Disc-In-Play function
As long as the ignition key is turned to the ON or
ACC position, this function allows you to turn the
power to the unit and start playing the disc auto-
matically when the disc is inserted even if the
power is not turned on.
Loading a CD
1. Insert a CD into the center of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be another
CD in the mechanism or the unit may require service.
• Discs not bearing the or mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Backup Eject function
Just pressing the [ Q] button ejects the disc even
if the power to the unit was not turned on.
1. Press the [ Q] button. Remove the disc after it
is ejected.
Notes:
• If you force a CD into before auto reloading, this
can damage the CD.
• If a CD is left in the ejected position for 15
seconds, the CD is automatically reloaded. (Auto
reload).
Set to MP3/WMA
Disc
Mixed with CD and
MP3/WMA type tracks
CD type track only
MP3/WMA type track only
Set to CD
Play CD
Play MP3/WMA
Setting
Play CD Play CD
Play MP3/WMA
Play MP3/WMA
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/MP3
mode.
When the unit enters the CD/MP3 mode, play
starts automatically.
If there is no disc loaded, the indication “NO
DISC
” appears in the title display.
Radio ➜ CD/MP3 ➜ M-CATCHER ➜ Radio…
∗ The mode changes each time the [SRC] button is
pressed.
MUSIC CATCHER
In the M-CATCHER (MC) mode, the files
recorded in the built-in flash memory are played
back. Operations for listening to a recording
made using MUSIC CATCHER are the same as
“CD/MP3/WMA Operations”. For operations for
recoding using MUSIC CATCHER, refer to the
section “MUSIC CATCHER Operations”.
Pausing play
1. Press the [ ] button to pause play. “PAUSE”
appears in the display.
2. To resume CD play, press the [ ] button
again.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc or M-CATCHER, and user titles input
with this unit.
1. Press the [D] button to display the title.
2. Each time you press the [T] button, the title
display changes in the following order:
●CD-TEXT disc
User title (disc) ➜ CD-text title (disc) ➜ Artist
name ➜ CD-text title (track) ➜ User title (disc)...
CD/MP3/WMA Operations
CAUTION
+DB456MC-005-ENG 05.1.24, 6:02 PM 15