Celestron CR-150 HD User Manual

Page 17

Advertising
background image

The CR-150 HD • 17

The telescope should also be balanced on the declination axis to prevent any
sudden motions when the DEC clamp is released. To balance the telescope in
DEC:

1. Release the R.A. clamp and rotate the telescope so that it is on one side

of the mount (i.e., as described in the previous section on balancing the
telescope in R.A.).

2. Lock the R.A. clamp to hold the telescope in place.

3. Release the DEC clamp and rotate the telescope until the tube is parallel

to the ground (see figure 2-10).

4. Release the tube — GRADUALLY

GRADUALLY

GRADUALLY

GRADUALLY

GRADUALLY — to see which way it rotates around

the declination axis. DO NOT LET GO OF THE TELESCOPE TUBE

DO NOT LET GO OF THE TELESCOPE TUBE

DO NOT LET GO OF THE TELESCOPE TUBE

DO NOT LET GO OF THE TELESCOPE TUBE

DO NOT LET GO OF THE TELESCOPE TUBE

COMPLETELY!

COMPLETELY!

COMPLETELY!

COMPLETELY!

COMPLETELY!

5. Slightly loosen the balance bracket thumbscrew and slide the telescope

either forward or backward until it remains stationary when the DEC clamp
is released. Do NOT let go of the telescope tube while the balance

Do NOT let go of the telescope tube while the balance

Do NOT let go of the telescope tube while the balance

Do NOT let go of the telescope tube while the balance

Do NOT let go of the telescope tube while the balance

bracket thumbscrew is loose.

bracket thumbscrew is loose.

bracket thumbscrew is loose.

bracket thumbscrew is loose.

bracket thumbscrew is loose.

6. Tighten the thumbscrew firmly to hold the telescope in place.

Like the R.A. balance, these are general balance instructions and will reduce
undue stress on the mount. When taking astrophotographs, this balance
process should be done for the specific area at which the telescope is pointing.

Balancing the Telescope

Balancing the Telescope

Balancing the Telescope

Balancing the Telescope

Balancing the Telescope
in DEC

in DEC

in DEC

in DEC

in DEC

Figure 2-10

Figure 2-10

Figure 2-10

Figure 2-10

Figure 2-10

As with R.A., the telescope should be balanced in DEC after all the standard accessories
(i.e., star diagonal, eyepiece, etc.) have been attached to the telescope.

Advertising