Concord Camera Eye-Q 3103 - Manual (Page 4)

Quick Start Guide
Taking Pictures
There are two Modes you can choose from to take a picture. In the Auto
Mode, just press the shutter button and let the camera judge the
environmental conditions for you. In the Manual Mode, you can manually
adjust the exposure and set the white balance based on different
environmental conditions. Please refer to page 21 of the user's manual.
1. Turn the Mode dial to Auto ( ) or Manual ( ).
Taking a Picture
2. Press the POWER button ( ) to power on the camera.
Using the Digital Zoom
) to zoom out. 4. Press the Down button (
3. Press the UP button ( ) to zoom in on the subject.
1. Turn the Mode dial to Auto ( ) or Manual ( ).
2. Turn on the LCD screen and the Information display (if not, press
DISP button).
When the LCD screen is on in Auto or Manual Mode, you can zoom
in on the subject before the image is taken.
3. Press the Shutter button halfway and
align the auto focus mark on the
subject you want to take. When the focus
is locked, the auto focus mark turns green.
If the display indicators on LCD screen turn
red, this means the camera’s auto exposure
and auto white balance function is not ready
or the conditions are not ideal for optimal
quality picture taking. If you take the picture despite the
conditions, the picture may be over or under exposed.
4. Take a picture by pressing the shutter button further. When the camera
beeps, the image has been captured and will be recorded on the card
3
or in the internal memory.
* The camera will not emit a beeping sound if this function is disabled.
5. During recording to the memory card, the LED indicator will flash
Green. Once the LED indicator stops flashing, the recording has
finished.