Curtis Mathes CM25101S - Manual (Page 17)

Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the ‘ TV ’ input to the ‘ Line1, Line2 ’ Input, as follows:
1 With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear.
2 Use the WCHV buttons to select “ Input ”.
3 Press the CVOLB buttons to change from ‘ TV ’ to ‘ Line1, Line 2 ’.
4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.
Select
Set-Up
Language : English
Input :
Line1
Adjust Next
3-1
Select
Set-Up
Language : English
Input :
Line2
Adjust Next
3-2
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust Next
2
12 Chapter 3: Operating Your TV
Select
Set-Up
Language : English
Input :
Line
Adjust Next
3
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust Next
2
CM27101S
CM25101S