CHEVROLET 1999 Cavalier User Manual

Page 275

Advertising
background image

yellow

blue

6-37

3. Disconnect the bulb base from the socket by lifting

the plastic locking tab.

4. Snap a new bulb into the socket.

5. Replace the bulb assembly by reversing Steps 1

through 3, making sure the lower leg of the
headlamp bracket is properly seated into the
wedge

-

shaped retainer.

Center High-Mounted Stoplamp
(Models Without a Spoiler)

To change the bulb, do the following:

1. Open the trunk and view the access hole under the

rear shelf.

2. Remove the bulb sockets by turning and pull down.

3. Remove the bulb and replace.

4. Re

-

install the new bulb and socket into the CHMSL.

Center High-Mounted Stoplamp
(Models With a Spoiler)

To change the bulb, do the following:

1. Use a TORX

R

screwdriver to unscrew the bulb

assembly from the spoiler.

2. Gently pull out the bulb assembly.

3. Remove the bulb(s) by gently wiggling the bulb

from the assembly.

4. Replace the bulb(s) and reverse these steps to replace

the bulb assembly.

Advertising