Coleman 9992-449 - Manual (Page 4)

Fig 5
Fig 6
Side Screws
(Repeat on left side)
Screws
under lip
Fig 8
Fig 7
Tabs
5. Remove the screws from the bottom of the heat
shield, holding the front heat shield in place. The
screws are located under the bottom lip of the
shield (Fig. 5).
6. Remove the side heat shield screws located under
the bottom lip of the heat shield. Remove all of
the top heat shield screws (Fig. 6).
7. Remove the front heat shield (Fig. 7).
8. Grasp and push the burners towards the rear of
the grill to detach the burner from the
valves (Fig. 8).
9. Angle the burners up and remove (Fig. 8).
Liquid Propane Gas Conversion Instructions
4