Chicago Electric 1/3 Sheet Finishing Sander 94338 - Manual (Page 8)

Page 8 For technical questions, please call 1-800-444-3353. Item 94338
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Specifications
Electrical Rating 120 VAC, 60 Hz, 2 A
No Load Speed 12,000 Orbits Per Minute
Dust Chute 1 1 /
4
″ OD
Sanding Pad Dimensions 3-5/8″ W x 7-3/8″ L x 1/4″ thick
Setup - Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION yy section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy REVENT SERIOUS INJUR REVENT SERIOUS INJUR FROM A yy ccIDENTAL OpERATION:
Make sure that the Trigger is in the off Trigger Trigger -position and unplug the tool from its
electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 11.
Assembly - Attaching the Dust Bag (29)
1. Connect the Dust Bag to the sander by firmly
pushing it into the dust port in the rear of the sander.
2. The Dust Bag (29) will only work if the
sandpaper has holes that line up with the
8 dust collection holes in the Pad (22).
E194601