Casio EXILIM EX-Z4 - Manual (Page 27)

91
OTHER RECORDING FUNCTIONS
1. In the REC mode, press [MENU].
2. Select the “Memory” tab, select the item you
want to change, and then press [
̈].
3. Use [
̆] and [̄] to select the setting you
want, and then press [SET].
To do this:
Turn on mode memory so settings
are restored at power on
Turn off mode memory so settings
are initialized at power on
Select this setting:
On
Off
IMPORTANT!
• Note that Best Shot mode settings take priority over
mode memory settings. If you turn the camera off
while in the Best Shot mode, the camera’s Flash,
White Balance, and ISO Sensitivity will be configured
according to the Best Shot sample scene when you
turn it back on again, regardless of mode memory
on/off setting.
• If you turn the camera off while in the Movie mode,
the flash will be turned off when you turn the camera
back on again, regardless of mode memory on/off
setting.
Resetting the Camera
Use the following procedure to reset all of the camera’s
settings to their initial defaults as shown under “Menu
Reference” on page 162.
1. In the REC mode or the PLAY mode, press
[MENU].
2. Select the “Set Up” tab, select “Reset”, and
then press [
̈].
3. Select “Reset”, and then press [SET].
• To cancel the procedure without resetting, select
“Cancel” and press [SET].