Canon 200 IS - Manual (Page 85)

85
While the shutter button is pressed halfway, the focus and exposure will
continue to adjust, allowing you to take pictures of moving subjects without
missing a shot.
Choose [Servo AF].
● Press the n button and choose
[Servo AF] on the 4 tab, and use the qr
buttons to choose [On].
Focus.
● Focus and exposure will be maintained
where the blue AF frame appears while
you press the shutter button halfway.
● If a face is not detected when AF Frame is
set to [Face AiAF]
(p. 82) , the AF frame
will be set to [Fixed frame].
Shooting with Servo AF
• The camera may not be able to focus and set the exposure in some
conditions.
• If a correct exposure cannot be obtained, the shutter speed and aperture
value are shown in orange. Take your finger off the shutter button, then
press it again halfway.
• You cannot shoot with the AF lock in this mode.
• While in Servo AF mode, [AF-Point Zoom] in the 4 tab cannot be set
to [On].
• Not available in Self-Timer (pp. 63 , 64 , 78 , 79) .