Continental Electric CE22671 - Manual (Page 3)

To assemble your citrus juicer
1. Place your Citrus Juicer motor base on a dry level surface.
2. Adjust the cord to the right length by simply winding or
unwinding the amount neededfrom the cord storage
located on the bottom of the motor base.
3. Assemble Citrus Juicer following the diagram in figure 1.
Insert reamer (a) into the top of the pulp strainer (b)
until it clicks. Line up strainer with juice container
handle until the two pieces fit together snuggly. Place
the juice container assembly (c) onto the shaft (d).
a. Reamer
c. Juice Container
b. Pulp Strainer
d. Shaft
To operate your citrus juicer
1. Prepare the fruit by cutting in halves.
2. Turn juice container from right to left to select the
amount of pulp in the juice. All the way to the right is
pulp-free juice. Turn all the way to the left for country
style “pulpy” juice.
3. As each citrus fruit half is juiced, lift the fruit from the
reamer and the motor will automatically stop.
4. To remove Pulp strainer, simply turn juice container all
the way to the left and lift up on the handle while
turning. (see figure 6). The handy pouring spout makes
serving easy. (see figure 7). Place the cover onto the
juice container for refrigerator storage.
Cleaning and storage
■
Always unplug your citrus juicer before cleaning.
■
Clean the motor base with a damp cloth only.
■ The juice container, pulp strainer/reamer, and the see
through cover should be washed in warm sudsy water,
rinsed thoroughly, dried and reassembled for storage.