Cambridge Audio 80 Series - Manual (Page 10)

10 80 Series DVD player
Connecting to a Digital TV set with HDMI (DVD89 only)
HDMI
The DVD89 also features a HDMI (High-Definition Multi-media
Interface) an industry-supported, uncompressed, all-digital audio/video
interface.
HDMI transfers the digital audio and video signals from the DVD player
to the television without the need for Digital to Analogue conversation.
This reduces signal loss resulting in the purest transfer of video and
audio information.
To select the HDMI output mode
(Press the DVI/HDMI button on the remote)
NTSC
Default - HDMi Off
Press once 480p
Press again 720p
Press again 1080i
PAL
Default - HDMi Off
1. 576p
2. 720p
3. 1080i
Progressive scanning is also available from Component Video Outs -
NTSC & PAL. See page 19 for more information.
Note: When in analogue output mode, the general setup page is set to
P-Scan.
> >
50Hz
> >
60Hz