Cobra Digital DC125 User Manual
Page 8
- 7 -
Photo Resolution Selection
Note: The resolution status will always show on the LCD display in small
characters.
1. Press the Function button to select the “
” icon shown on the LCD
display.
2. “Hi” means CIF mode 352 x 288 Pixels, “Lo” means QCIF mode 176 x
144 pixels
3. When you select the Mode function, press the shutter release once to
switch between the Hi mode and the Lo mode. The Hi mode will allow
you to take 19 photos and the Lo mode will allow you to take 76 photos.
Frequency Selection
1.
Generally speaking, 60Hz fluorescent lamp frequency is used in the
United States and Asia. And 50Hz is used in Japan and Europe. If
the wrong frequency is selected, the photos or the video will be
distorted.
2.
Press the Function button to select either 50 Hz or 60 Hz as shown
on the LCD display.
Photo Compression Ratio Selection
The compression ratios available are either “Hd” or “Ld” for the photos
stored in memory. The higher the compression, the more photos you
can take without having to download them to your PC. You can take up
to 152 photos in the “Hd” mode when you select the low resolution (Lo)
setting preset on your camera (see the photo resolution section above).
Photo Storage
The number of photos that can be taken will vary depending on the