Chamberlain POWER DRIVE PD600 - Manual (Page 7)

Hardware Inventory
Separate all hardware and group as shown below for the assembly and installation procedures.
7
Lock Washer
5/16" (4)
Nut 5/16" - 18 (4)
Clevis Pin
5/16"x2-3/4" (1)
NOTICE
Handle
ASSEMBLY HARDWARE
INSTALLATION HARDWARE
Dry Wall Anchors (2)
Clevis Pin
5/16"x1" (1)
Rope
Lock Nut
1/4" - 20 x 7/16" (12)
Nut
5/16" - 18 (5) Washered Screw
5/16" - 18 x 1/2" (2)
(mounted in motor unit) Carriage Bolts
1/4" - 20 x 1/2" (12)
Hex Screw
5/16" - 18 x 7/8" (3)
Master Link (2)
Ring
Fastener (3)
Threaded
Trolley Shaft (1)
Lock Washer 5/16" (4) Lag Screw
5/16"-18 x 1-7/8" (2)
Wing Nut
1/4x20 (2) Insulated
Staples (30)
RAIL GREASE
NO. 83A4
Rail Grease
Hex Screw
5/16"- 18 x 7/8" (4)
Carriage Bolts
1/4"-20x1/2" (2)
Lag Screw
5/16"- 9 x 1-5/8" (2)
Clevis Pin
5/16"x1-1/4" (1)
Screw
6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw
1/4"-14x5/8" (2)