Crate Amplifiers VC-50H User Manual
Page 8
Output Power Rating
50W RMS @ 10% THD, 8 ohm load, 120 VAC
Input Impedance
1M ohm
Maximum Signal Accepted
2.8V peak to peak
Signal To Noise Ratio
Channel B:
52dB
Channel A:
58dB
Gain
Channel B:
75dB
Channel A:
68dB
Tone Control Range
Channel B:
Bass:
12dB range @60Hz
Mid:
10dB range @600Hz
Treble:
7dB range @4kHz
Channel A:
Bass:
20dB range @70Hz
Treble:
16dB range @2kHz
Line Out Level
375mV RMS @ full power output
Tube Types
Preamp: (4) 12AX7 Power Amp: (4) EL84/6BQ5
Power Requirements
120VAC, 60Hz, 145VA/30W, 170VA/50W
100/115VAC, 50/60Hz, 145VA/30W, 170VA/50W
230VAC, 50/60Hz, 145VA/30W, 170VA/50W
Size and Weight
21.25”W x 11”H x 11.25”D, 35 lbs
©1998 SLM ELECTRONICS • A division of St. Louis Music • 1400 Ferguson Avenue • St. Louis, Mo 63133
P/N 47-547-13 • 07/98
TECHNICAL SPECIFICATIONS:
To keep this amplifier looking its best, avoid abrasive cleaners. Wipe the cabinet clean using a
slightly dampened cloth. Never use abrasive cleaners on the hardware since they could damage
their protective coatings.
Crate continually develops new products, as well as improves existing ones.
For this reason, the specifications and information in this publication
are subject to change without notice.
VC-50H Vintage Club Amplifier
www.crateamps.com