Compaq 810 - Manual (Page 6)

VAX 7000 Model 810
4.36 VAX Systems
Step 6—OpenVMS Cluster Options
For OpenVMS Cluster configurations, select appropriate OpenVMS Cluster options. CI controller, BNCIA cables, and
VAXcluster Software license required.
HSJ50-AF/AH/AJ StorageWorks array controller, supports up to 36 SCSI-2 devices. Includes 32/64/128 MB Read
Cache and controller based disk striping.
HSD10-BF StorageWorks array controller; supports up to seven SCSI-2 devices.
HSD30-CD/CF StorageWorks array controller; supports up to 18 SCSI-2 devices.
SW5xx/SW8xx StorageWorks arrays. See Storage Devices for details.
BNCIA-xx Computer interconnect cable sets—connects Star Coupler to system and SW800 or HSCxx Choose
required length of 10, 20 or 45 m (10 m = 32.8 ft, 20 m = 65.6 ft, 45 m = 147.6 ft).
SC008-AC 8-port Star Coupler; maximum five Star Couplers per system.
SC008-AD Star Coupler; Upgrades SC008-AC to 16 ports; maximum one per SC008-AC.
QL-VBRA5-AA VAXcluster license; required with each system that will connect to an OpenVMS Cluster.
Step 7—Console Terminal
A console terminal with EIA-232 25-pin D-subminiature connector and printer required unless otherwise available.
VT510-xx VT510 terminal
LA75S-xx LA75 Plus printer
LAXXS-AD VT510/LA75 table for both VT510 and LA75
Step 8—Terminals and Printers
Order printers and terminals if required.
Step 9—Software
Note: An OpenVMS Group Table Patch is available that enables OpenVMS Concurrent Use License PAKs and
Distributed Interactive User License PAKs; it can be duplicated and used with each valid license. Customers are
allowed to install and use the patch under their existing license agreement. The kit is available on the Internet at the
following address: http://www.service.digital.com/html/patch_service.html. It can also be obtained by ordering the
following:
QA-MT3AC-H8 OpenVMS VAX and Alpha Group Table Patch on CD-ROM
OpenVMS VAX Concurrent Use Licenses
OpenVMS VAX Concurrent Use licenses are for customers running OpenVMS VAX V6.2 or greater, see above note.
OpenVMS VAX Concurrent Use license provides the right to interactively use the operating system by the specified
number of concurrent users on a designated OpenVMS system. OpenVMS Concurrent Use licenses can be moved from
one OpenVMS system to another OpenVMS system at user discretion and can be shared in a mixed OpenVMS VAX and
OpenVMS Alpha Cluster.
QL-MT3AA-3B OpenVMS Concurrent Use 1-user license
QL-MT3AA-3C OpenVMS Concurrent Use 2-user license
QL-MT3AA-3D OpenVMS Concurrent Use 4-user license
QL-MT3AA-3E OpenVMS Concurrent Use 8-user license
QL-MT3AA-3F OpenVMS Concurrent Use 16-user license
QL-MT3AA-3G OpenVMS Concurrent Use 32-user license
QL-MT3AA-3H OpenVMS Concurrent Use 64-user license
QL-MT3AA-3J OpenVMS Concurrent Use 128-user license
QL-MT3AA-3K OpenVMS Concurrent Use 256-user license