Crestron electronic UPX-OS4GB-MSO-2007 - Manual (Page 5)

Crestron UPX-OS4GB-MSO-2007 UPX Memory & OS Upgrade
7. Use the power switch to turn on the UPX-2. The license agreement
will be displayed after approximately 30 minutes.
WARNING: It may take up to 30 minutes for the first boot to
complete. During this period, the display will cycle through colors,
show a blank screen, display a splash screen and reboot before
displaying the license agreement. DO NOT cycle the power during
this time period unless the license agreement is not displayed
within 30 minutes. Otherwise, the 4GB flash card will be damaged.
8. To continue, use the mouse to click on the “I agree” button. The
SETUP MENU will be displayed.
NOTE: The mouse must be used to click the “I agree” button. Do
not use the touchpanel.
NOTE: The touchpanel will need to be recalibrated after
installing the new compact flash card. For instructions on
calibrating the touchpanel, refer to the latest revision of the UPX-2
Operations Guide (Doc. 6276) which is available from the Crestron
website.
NOTE: Once a compact flash card is used on a specific UPX-2 it
cannot be used on another unit.
Installation Guide – DOC. 6676A UPX Memory & OS Upgrade: UPX-OS4GB-MSO-2007
• 3