Cd50 mk2 compact disc player – Creek Audio CD50 mk2 User Manual
Page 10
10
CD50 mk2 Compact Disc Player
REPEAT A PROGRAMMED SEQUENCE OF TRACKS
1.
Enter a program.
2.
Press the
REPEAT
button twice and the
REPEAT ALL
message will appear.
3.
Press the
PLAY
button, the
PLAY
symbol will be displayed and the programmed sequence will start playing.
4.
All programmed tracks will continue playing in order until the
S T O P
button is pressed.
5. If
the
REPEAT
button is pressed once more, the
REPEAT ALL
message will disappear and Program mode will
resume.
‘A « B’ DISC PLAY
(Remote control only)
Use to repeatedly play a portion of the disc, from point A to point B.
1.
Press the
PLAY
button.
Go to the starting point of your selection using
and
keys and press the
button.
The
REPEAT
message will appear, with the letter
flashing, and point
A
will be stored in the
memory.
2.
Press the
button again at the end point of your choice.
The letter
will stop flashing and point
B
will be stored in the memory. The segment between
A
↔
↔
B
will be
repeatedly played.
3. To
clear
REPEAT
, press the
button or the
REPEAT
button once
NUMERICAL KEYS ON THE REMOTE CONTROL
To save time tracks can be chosen by pressing any numerical keys.
1.
For tracks 1 to 10:
If you want to listen to track 4 for example,press the No 4 button. The
track
indicator will show 4.
Press
PLAY
, the
PLAY
symbol will appear and track 4 will start playing.
NOTE:
You can select a desired track while the disc is playing, i.e. if you want to listen to track 4, just press No
4 button and track 4 will start playing.
2.
For more than 10 tracks:
If you want to listen to track 14, press button 1 + button 4 within 2 seconds.The
track
indicator will show track 14.
If the player is already running track 14 will start playing automatically.If not, press
PLAY
and track 14 will start playing.
A / B
B
A
↔
↔
B
A / B
B
B
A
↔
↔
A / B