Casio SF-7100SY - Manual (Page 74)

– 72 –
To send Calendar data (highlights)
1. In the Calendar Mode, press FUNCTION and then select “Send (Holidays)”.
2. Input a number 1 or 2 to select the model to which you want to send the data.
•
A message appears asking if you are ready to send.
3. Press Y to start the send operation, or N to abort.
•
To interrupt the send operation at any time, press ESC.
•
After the send operation is complete, the display returns to the screen that was
on the display before you started the send operation. Then you can repeat the
above procedure to send another item.
■ Sending All Data Items In a Mode
The procedure you should use depends on whether the file whose data items you are
sending has multiple files (Telephone Directory, Memo, To Do, Expense Manager)
or not (Schedule Keeper, Reminder).
To send all data items from a multiple file mode (Telephone
Directory, Memo, To Do, Expense Manager)
1. Display the initial screen of the mode that contains the data you want to send.
•
You can display the initial screen for any file.
2. Press FUNCTION and then select “Send all files”.
3. Use
K and L to move the pointer to the file whose data you want to send, and
then use
H and J to change the setting.
•
Files set to “Yes” will be sent, while those set to “No” will not.
4. Press ENTER.
5. Input a number 1 or 2 to select the model to which you want to send the data.
•
At this time the message “READY TO SEND (Y/N)?” appears.
6. Press Y to send or N to abort.
•
In the Telephone Directory, Memo, and To Do Modes you can also use another
method to send all data items. While the index display or data display is on the
screen, press FUNCTION and then select “Send all records”.