Adjusting the audio, English – Clarion VRX765VD User Manual

Page 22

Advertising
background image

Basic Operations

24

VRX765VD

English

Owner

’s ma

nua

l

280-8358-00

Adjusting the angle of the liquid
crystal panel

The angle of the liquid crystal panel can be
adjusted depending on the mounting angle of the
unit or light coming into the car.
1. Turn the power on. When the liquid crystal

panel is closed, press the [

P] (OPEN)

button.

2. Press the [ADJ] button, touch the [MONITOR]

key, and then touch [

C] key to display the

following screen:

3. Repeat touching the [

0] key to adjust the

angle of the liquid crystal panel. Every
touching the [

0] key tilts the liquid crystal

panel forward or backward.
The adjusted angle is stored in memory.
* Adjustment is possible within the range 70

° to

110

°.

* There are 5 adjustable angle available.

Housing the liquid crystal panel

1. Press the [

P] (OPEN) button.

The liquid crystal panel is housed
automatically.

Note:
When leaving this unit unused for a long period of

time or leaving your car, be sure to house the liquid
crystal panel.

Turning the liquid crystal panel
horizontal (Air conditioner operation
mode)

When the way the liquid crystal panel is mounted
hinders the operation of the air conditioner, the
position of the panel can be turned horizontal
temporarily.
1. Keep pressing the [

P] (OPEN) button more

than 2 seconds when the liquid crystal panel
is open.
A beep sounds and the liquid crystal panel
turns horizontal.
* Press the [P] (OPEN) button again for the

panel to return to the original position.

* The unit can be set so that the panel returns to

the original position after a set time in the
horizontal position (See page 28).

Adjusting the AUDIO

Note:
When the optional 5.1 ch Surround Decoder

(DVH940) is used, the following tone adjustments
cannot be made. To adjust the tone, refer to the
section “5.1 ch Surround Decoder Operations”.

1. Press the [ADJ] button, then touch the

[AUDIO] key.

2. Touch the item key to adjust.
3. Perform the adjustment.

See the following sections for detail.

4. Touch the [Back] key to return to the previous

screen.
* In the following sections, only the details

regarding adjustments are described,
procedures to select items are skipped.

MAX 110˚

70˚

Eng.book 24 ページ 2005年12月27日 火曜日 午後11時36分

Advertising