Caldera GT305 - Manual (Page 4)

4
IMPORTANT! Read all instructions before using your gastop unit. If
you have questions please call your local dealer or distributor
Electrical Requirements
Your gastop must be connected to a properly grounded 120 volt AC 60 Hz, 15 amp electrical service
and installed by a qualified installer. It is the personal responsibility and obligation of the customer to
contact a qualified electrician/installer and have the unit connected to a properly grounded circuit in
accordance with local codes of your area or, if no codes apply, the National Electric Code, ANSI/NFPA
70- Latest Edition must be followed. Copies are available by writing::
National Fire Protection Association
Battery March Park
Quincy MA 02269
In Canada follow CAN/CSA-C.22.1, Canadian Electrical Code, Part 1.
Copies are available by writing::
CSA
178 Rexdale Boulevard
Toronto, Ontario,
CANADA, M9W 1R3
Important Safety Instructions
As with all appliances there are certain rules to follow for safe operation. Make sure everyone who
operates this gastop is familiar with the operation and with the following precautions.
It is the personal responsibility and obligation of the customer to contract a qualified installer and have
the unit connected properly in accordance with local codes or, in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1 - Latest Edition and CAN/CSA-B149.1 Natural Gas and Propane
Installation Code. The gastop must be connected to the proper gas supply and checked for leaks.
Using Gas Safely
Gas fuels and their uses can cause minor exposure to benzene, formaldehyde, carbon monoxide and
soot, primarily from incomplete combustion. Significant exposure to these substances can cause cancer
or reproductive harm. Properly adjusted burners with a blue, rather than yellow, flame will minimize the
incomplete combustion. Venting with a hood, or open window will further minimize exposure.
? The maximum gas supply pressure may not exceed 14-inches W.C.P. (1/2 PSI)
? Never use a match or other flame to locate a gas leak. Explosion fire or injury could result.
? Know where your main gas shut off valve is located.
C A L D E R A