Cortelco 2730 - Manual (Page 11)

11
TELEPHONE FEATURES
DIALING
The 2730 is only capable of DTMF dialing. It is not capable of pulse dialing.
RECEIVING A PHONE CALL
1. When the phone rings, lift the handset or press SPEAKER to begin your conversa-
tion.
2. To change the Ringer Volume, refer to the “Factory Presets” section.
PLACING A PHONE CALL
1. Lift the handset or press the SPEAKER button and wait for a dial tone.
2. Dial the telephone number you wish to call. The number will appear on the display
window.
PREDIAL
1. While the handset is on hook, enter the desired telephone number using the key pad.
The number will appear in the display. To delete a digit or the entire number, press
REVIEW DOWN.
2. To dial the displayed number, lift the handset, press SPEAKER or DIAL.
SPEAKER BUTTON
1. Receiving Incoming Calls
a.
When the phone rings, press and releaseSPEAKER and speak normally into
the built-in microphone from a distance of 5-6 inches.
b. You can adjust the volume of the caller’s voice by by pressing the Volume
Button on the base of the telephone.
c. After the conversation has finished, press and release SPEAKER to hang up.
2. Making A Call
a.
Press and release SPEAKER.
b. When you hear a dial tone, dial the number or press the auto memory
button. The number will appear on the display window.
c. When your party answers, adjust the volume of the conversation by pressing
the Volume Button on the base of the telephone.
d. After the conversation has finished, press and release SPEAKER to hang up.
Note:
1. If you wish to switch from speakerphone to handset, simply lift the handset.
2. If you wish to switch from handset to speakerphone, press and release SPEAKER and
then hang up the handset.
DURATION COUNTER
A built-in counter will start counting 6 seconds after you lift the handset or 6 seconds
after you dial a telephone number.