Philips FW48-37 - Manual (Page 14)

OPERATING THE SYSTEM
Important
Before you begin operating the system, compiete the
preparation procedures.
Switching the system ON
• Press STANDBY-ON or SOURCE (or CD, TUNER or
TAPE on the remote control).
Switching the system to standby mode
• Press STANDBY-ON again (or (!) on the remote
control).
Selecting the Sound Source
• Press SOURCE to select either TUNER, CO, TAPE or
VIDEO/AUX (or CD, TUNER or TAPE on the remote
control).
-* * The display indicates the selected sound source.
You can also select the sound source directly by selecting
the respective PLAY button orS CD DIRECT PLAY buttons
for CD or the PRESET, BAND or TUNING button for TUNER
mode.
Note:
For an external sound source, make sure that you have
connected the audio left and right output terminals of the
external equipment (TV, VCR or Laser Disc player) to the
AUX IN terminals at the rear of the set.
Volume Adjustment
TurnVOLUME^or^(orpressVOL -I- or — onthe
remote control) to increase or decrease the sound level.
For Personal Listening
Connect headphones to the PHONES O socket The
speakers will be muted.
Digital Sound Control (DSC)
• To enjoy a special sound effect, press JAZZ (/ ),
ROCK I ), CLASSIC () or POP (/).
• You can also press DSC on the remote control to select
the respective sound setting, including OPTIMAL
Optimal Sound
• Press OPTIMAL to hear the sound setting that is tuned
to the acoustics of the supplied speakers.
Dynamic Bass Boost (DBB)
• Press DBB to enhance the bass response.
-* The OBB flag lights up.
14