Compaq 7500 - Manual (Page 9)

User’s Guide 7
■ Unplug your monitor from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning. If the screen requires additional cleaning, use an antistatic
CRT screen cleaner.
Ä
CAUTION: Do not use benzene, thinner, ammonia, or any other
volatile substances to clean your monitor or the screen. These
chemicals may damage the cabinet finish as well as the screen.
■ Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push objects
of any kind into cabinet slots or other openings.
■ Do not place plants on top of your monitor. Water or dirt from the
plant may get into the vents.
■ Do not drop your monitor or place it on an unstable surface.
■ Do not allow anything to rest on the power cord. Do not walk on the
cord.
■ Keep your monitor in a well-ventilated area, away from excessive
light, heat or moisture. Keep your monitor away from high-capacity
transformers, electric motors, and other devices with strong
magnetic fields.
■ In a two-monitor system, place your monitors as far apart from one
another as possible to lessen interference between them.
■ Do not place the monitor face down. Damage could result to the
front panel controls or the monitor screen.
Ä
CAUTION: Burn-in image damage may occur on monitors that
display the same static image on screen for a prolonged period of
time. To avoid burn-in image damage on your monitor screen, you
should always activate a screen saver application or turn off the
machine when it is not in use for a prolonged period of time.
306852-001.book Page 7 Wednesday, July 31, 2002 5:16 PM