Conair TCR500 - Manual (Page 5)

FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules.
On the bottom of the base of this equipment is a label
that contains, among other information, the FCC
Registration Number and Ringer Equivalence Number
(REN) for this equipment. You must, upon request,
provide this information to your telephone company.
The REN is useful to determine the quantity of devices
you may connect to your telephone line and still have
all of those devices ring when your telephone number
is called. In most, but not all areas, the sum of the
RENs of all devices connected to one line should not
exceed five (5.0). To be certain of the number of devices
you may connect to your line, as determined by the
REN, you should contact your local telephone company
to determine the maximum REN for your calling area.
If your telephone equipment causes harm to the
telephone network, the telephone company may
discontinue your service temporarily. If possible, they
will notify you in advance. But if advance notice isn’t
practical, you will be notified as soon as possible. You
will be informed of your right to file a complaint with
the FCC.
Your telephone company may make changes in its
facilities, equipment, operations, or procedures that
could affect the proper functioning of your equipment.
If they do, you will be notified in advance to give you
an opportunity to maintain uninterrupted telephone
service. If you experience trouble with this telephone
equipment the telephone company may ask that you
disconnect this equipment from the network until the
problem has been corrected or until you are sure that
the equipment is not malfunctioning.
This equipment may not be used on coin service
provided by the telephone company. Connection to
party lines is subject to state tariffs.
This equipment is hearing aid compatible.
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequently energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Increase the separation between the equipment and
receiver.
• Connect the equipment into and outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio TV
technician for help.
Additional Information
A. When your CONAIRPHONE TM is not in use, make
sure the handset is engaged into the base unit.
B. Avoid rough handing, areas with excessive
moisture, heavy dust or extreme temperature.
C. To clean, use a mild detergent and slightly damp
cloth, never use strong solvents or abrasives.
D. Connecting this telephone to a coin operated
telephone or party line is prohibited by law.
E. If it is deter mined that your telephone is
malfunctioning, the FCC requires that it be
disconnected from the modular outlet until the
problem has been corrected.
period, set the ON/OFF/MUSIC/ALARM switch to
ON. Remember to reset the ON/OFF/MUSIC/
ALARM switch to ALARM so the alarm will sound
automatically the next day.
3. Press the [ALARM RESET] to turn the alarm off
completely. The alarm will come on again the next
day at the same time.
Snooze Bar Control
If you wish to sleep a few extra minutes after your alarm
sounds, press the SNOOZE control. This will silence
the radio or alarm. The radio or alarm will sound again
9 minutes later. You can use the SNOOZE feature
repeatedly for up to approximately two hours.
Sleep Button Control
The SLEEP control feature lets you turn the radio on
for up to about two hours while you doze off to your
favorite radio program.
1. Set the ON/OFF/MUSIC/ALARM switch to OFF,
MUSIC or ALARM position as desired.
2. Press the SLEEP control once, the radio will play
for 59 minutes. Hold the SLEEP control and press
the MINUTE control will decrease the playing time.
3. Release the MINUTE control when the desired
length of time is displayed on the clock.
4. If you want to extend the playing time more than
one hour, hold the SLEEP control and press the
HOUR control. The radio will play for 1 hour and 59
minutes. Then, release the HOUR control and press
the MINUTE control to decrease playing time.
5. Repeat step 3 to set the desired length playing time.
6. To turn off radio sooner, press the SNOOZE control
once.
ELECTRONIC CLOCK DISPLAY
The clock face always displays the correct time except
when the following controls are pressed:
SLEEP-Displays and sets the length of playing time
radio will play before automation shut-off. ALARM-
Displays alarm time set.
SERVICE
According to FCC regulations, this equipment, which
has been certified and registered by the FCC, may
only be repaired by authorized persons. If repairs or
adjustments are made by an unauthorized person, the
FCC certification may be voided. Should you encounter
any problems, please call the Conairphone
TM toll-free
Customer Hotline for assistance:
1-800-366-0937, Monday - Friday
between the hours of 8:30 am - 9:00 pm and
Saturday 8:30 am - 12:30 pm (EST).
You can also visit our website at
www.conairphone.com
FOR IN-WARRANTY SERVICE:
Package your complete unit (including all adapters,
line cords, and other accessories) and ship the unit
postage prepaid* and insured (for your protection) to:
CONAIRPHONE TM
DEPT.: In Warranty Repair
7475 North Glen Harbor Blvd., Glendale, AZ 85307
Be sure to include your return address, proof of
purchase, a daytime phone number, $5.00 for postage
and handling
* , and a brief explanation of your
difficulties.
* NOTE: California residents need only provide proof
of purchase and should call 1-800-366-0937 for
shipping instructions.
FOR OUT-OF-WARRANTY SERVICE:
You may call our toll-free Help Line for the price of a
replacement before returning your unit. Please follow
all instructions for In-Warranty service (above) to return
your unit, and mark the package: DEPT.: Out-of-
Warranty.
If you have called and know the cost of your
replacement, please include this information with your
unit for prompt service.
13 14 15 16