Canon FAX-L400 - Manual (Page 46)

4-13
Sending a Document to More Than One Destination
This feature allows you to scan a document once and send it to several destinations. You can send the document
to a maximum of 140 destinations using a combination of the following dialling methods:
• One-touch speed dialling: up to 30 destinations
• Coded speed dialling: up to 100 destinations
• Regular dialling (using the numeric keys), redialling: 10 destinations
You can enter the destinations in any order. (Be sure to press OK after your entry with the numeric keys.)
• If you frequently send documents to the same group of destinations, you can group them and register
these numbers for group dialling. You can register up to 129 fax numbers with group dialling and send
the same document to these numbers. (
→ p. 3-7)
1 Press FAX to set to Fax mode.
2 Prepare the document and load it face up in the ADF.
(Standby to scan)
• If you use the platen glass to send a document
→ p. 4-9.
• To adjust the resolution
→ pp. 4-1, 4-2.
• To adjust the scanning density
→ p. 10-4.
3 Enter up to 140 fax numbers using any of the following methods:
❚ One-touch speed dialling:
Press the desired one-touch speed dialling key(s).
Ex:
❚ Coded speed dialling:
Press Coded Dial
→ use the numeric keys to enter the two-digit code. Repeat for other codes.
Ex:
TEL= 1 49 39 25 25
A 02 Canon FRANCE
TEL= 2 50921
04 Canon ITALIA
DOCUMENT READY
NOTE
Sequential Broadcasting
Sending Faxes
4