Seats and restraints 3-55 – Cadillac 2011 Escalade EXT User Manual

Page 111

Advertising
background image

Black plate (55,1)

Cadillac Escalade EXT Owner Manual - 2011

Seats and Restraints

3-55

If the child restraint manufacturer
recommends using a top tether,
attach and tighten the top tether to
the top tether anchor. Refer to the
instructions that came with the child
restraint and see Lower Anchors
and Tethers for Children (LATCH
System) on page 3‑48
.

1. Put the child restraint on

the seat.

2. Pick up the latch plate, and run

the lap and shoulder portions of
the vehicle's safety belt through
or around the restraint. The child
restraint instructions will show
you how.

3. Push the latch plate into the

buckle until it clicks.

Position the release button on
the buckle so that the safety belt
could be quickly unbuckled if
necessary.

4. Pull the shoulder belt all the way

out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.

Advertising
This manual is related to the following products: