Philips PR1908C - Manual (Page 2)

H ooking U p Y our TV (A ntenna /C able C onnections )
A ntenna [BEGIN]-
<i>i
CoMiiiNAiiON UHF/VHF
A combination antenna
receives normal
broadcast channels (VHF
2-13 and UHF14-69).
Your connection is easy
since there is only one
75Q. (ohm) antenna plug
on the back of your TV -
and that’s where the anten­
na goes.
If your antenna has a
round cable (75Q) on the end,
then you're ready to connect it
to the TV.
If your antenna has flat twin-
lead wire (300Q), you first
need to attach the antenna wires
to the screws on a 300 to 75Q
adaptor.
<l>
Push the round end of the
adaptor (or cable) onto the
ANT(enna) IN(put) plug on the
rear of the TV. If the round end
of the adaptor or cable is
threaded, screw it down tight.
Back of TV
Combination
VHF/UHF
Antenna
(Outdoor or
Indoor)
Round Cable
750
Remember, _
be sure to set the
TV for the type sig­
nal you’ve connect­
ed (see page 4).
To set the TV to
select only the
channel numbers in
your area, see
“Channel Auto
Memo” on page 4.
SKPARATit UHF/VHF
y bu may have two sepa­
rate antennas. One
antenna is for VHF chan­
nels (2-13) and the other
antenna is for UHF chan­
nels (14-69).
For homes with separate
UHFAIHF antennas, you
will need an optional
"combiner" before you can
connect to the TV.
[BEGIN!
<i>
Attach the separate
UHF and VHF antennas to
the correct screws on the com­
biner.
<l>
Push the round end of the combiner
onto the ANT(enna) IN(put) plug on the
rear of the TV.
U/V Combiner
To order _
any optional acces­
sory, contact your
dealer or call the
toll-free accessory
ordering number
(1-800-292-6066).
• UHF/VHF
Combiner:
(SBV1133A01)
• 75-300 H
Adaptor:
(SBV1113A01)
• 300-75H
Adaptor:
(4835 218 27003)
-2-