Unlocking – CLIFFORD Model RSX1.2 User Manual

Page 17

Advertising
background image

14

© 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d

If Passive Mode has been programmed on, then it is also possible

to program the system for Passive Locking. With Passive Locking,

the vehicle doors lock automatically at the same time that the

Failsafe

®

Starter Kill is activated. If Passive Locking is

programmed on, care must be taken to prevent the keys from

being locked in the vehicle.

The remote responds to active arming with one beep and the

Orange LED will flash 3-times to indicate successful locking of

the system.

If after 2-seconds the remote beeps once, the Orange LED flashes

6-times and the Red LED lights for 3-seconds, the system has

detected an open hood.

unlocking

Pressing

for one second disarms the system and unlocks the

doors (if connected). The horn will honk twice (if connected)

and the parking lights will flash twice to confirm disarming of the

system. The optional Failsafe

®

Starter Kill will be deactivated.

The in-vehicle status LED will turn off, unless the system is pro-

grammed for Passive Mode. In Passive Mode, the in-vehicle status

LED will flash rapidly when the system is disarmed. This indi-

cates that the system will re-engage the starter kill and re-lock the

doors (if Passive Locking has been programmed) in 30 seconds

unless the ignition is turned on.

n

noottee:: For Passive Mode to be effective, the Failsafe®
Starter Kill relay must be installed.

Advertising