Audio, Audio setting, Press a / t to select the item, then press enter – Philips DVD850AT99 User Manual
Page 38: Audio out select c!ss, Select the output sound type by pressing, Customizing the settings, Continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Function Setup ^
Customizing the Settings
(continued)
■i)))
AUDIO
After you select AUDIO adjust the categories to your preference.
AUDIO Setting
i
©
O
O
ENTER
O
0 (Continued from page 32.)
Press
A
/
T
to select the item, then press ENTER.
Audio Out Select
c!SS^
msm
DynomkRon
9
e
Control
E3
Kereoke
Vocal
EUl
Ldended Audio Feelures E3
ЗD(N-^2} Em
Analog 6di
Analog 2ch
PCM
Select the output sound type according to your system connection.
For details of sound recording systems, see
Bitstream:
Select when connected to an amplifier equipped with a Dolby Digital,
DTS, MPEG1 or MPEG2 decoder. [u>
The DVD video player outputs digital audio information in the bitstream
format when you play a DVD video disc recorded on the Dolby Digital,
DTS, MPEG1 or MPEG2 recording system.
Analog 6ch:
Select when connected to a Dolby Digital ready amplifier equipped with
5.1 oh audio inputs. ¡1^
This DVD video player is equipped with a Dolby Digital decoder.
The next screen will appear for the detailed setting. See ¡39^.
Analog 2ch:
Select when connected to a TV, or Dolby Pro Logic or stereo system via
the analog audio jacks. ¡¡3>
PCM:
Select when connected to a 2 channel digital stereo amplifier. [T^
The DVD video player outputs sounds in the PCM 2ch format when you
play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2
recording system.
aeieci tne ouxpui souna i
©
A
/
T,
then press ENTER.
^ Select the output sound type by pressing
-> If you do not adjust any other settings, proceed
to step
4.
38