Vermont Casting RUVS40 - Manual (Page 3)

3
Vermont Castings Radiance
Fuel Type: NG LP
Manifold Pressure; Min. / Max.: 1.7"/3.5" 5.4"/11.0"
Min. Inlet Supply Pressure for
adjustment::
5.0" W.C. 11.0" W.C.
Max. Inlet Supply Pressure for
adjustment:
8.0" W.C. 12.0" W.C.
Min. Output, BTU/hr: 26,000 26,000
Max. Output, BTU/hr: 35,000 35,000
Ignition : Piezo
Firebox Weight / shipping: 175 lbs.
Radiance Unvented Gas Heater RUVS40
This appliance may be installed in an aftermarket*
manufactured (mobile) home, where not prohibited by
state or local codes.
This appliance is to be used only with the type of
gas specified on the rating plate which is attached to
the rear panel. This appliance is not convertible for use
with other gases.
Available Optional Accessories:
• Fan Kit #2767 / FK26
• Glass Panel / Catalyst Kit RGDCK
*Aftermarket: Completion of sale, not for purpose of resale, from
the manufacturer.
Specifications
31"
(787.4mm)
29 ³⁄₄ "
(755.7mm)
R A D I A N C E
18
³⁄₈
"
(466.7mm)
11"
(279.4mm)
28 ¹⁄₄ "
(717.6mm)
6
¹⁄₂
"
(165.1mm)
Drawing Not to Scale
ST181
Supply Inlet
Dimensions
Fig. 1 Radiance Vent Free dimensions.