Canon SX80 MARK II - Manual (Page 2)

Power Management:
a. The projector must have an internal condenser to run the fan making it possible to unplug the projector as soon
as it is turned off, to prevent damage to the projector and lamp in case of accidental power lost.
Control Management:
b. The projector must have a network adapter for LAN control.
c. The projector must have RS-232C serial control port to be used with control systems.
d. The projector must have an IR sensor in the front and rear for remote control capability.
Control System Compatibility:
a. The projector must be certified to be used with AMX, Crestron and Extron systems.
Ratings:
a. The projector must be powered by 100V to 240V/ 50/60Hz.
b. The projector must weight less than 12 pounds.
c. The Projector’s noise level must not exceed 35dB in brighter mode.
Warranty:
a. The projector must have a 3 year warranty on parts and labor.
b. The projector’s lamp warranty must be 120 days.
*Only display JPEG images.