Perfect Aire PAU1 - Manual (Page 7)

How to Use Your Humdifier (continued)
3. When refilling water bottle (tank), note:
a. Always unplug unit before filling and replacing water bottle.
b. Distilled or softened water is highly advised. Minerals in (hard) tap water may cause a
“white dust” to appear on furniture and can also eventually cause unit failure.
c. Extreme temperatures can damage unit. Water temperatures should NEVER be too hot
or too cold. Water temperature should fall between 40°F and 90°F.
d. Return water bottle securely to base before turning on humidifier.
4. To Turn Unit On
a. Plug power cord into a 110-120V AC wall outlet only.
b. Turn the On/Off Adjustment Knob in a clockwise direction to begin operation of unit.
c. Turn mist output control nozzle to manually adjust mist direction.
5. To Turn Unit Off
a. Turn unit off when desired room humidity is achieved by turning the On/Off Adjustment
Knob counter-clockwise.
b. Always turn unit off when water bottle is empty.
c. Unit will automatically stop creating mist when water level in base is very low.
d. Do not let water sit in water bottle tank or base for more than 24 hours.
e. Unplug when not in use.
DANGER:
Improper use of electric cords and plugs can cause a fire or electric shock hazard. NEVER pull
on the cord to remove the plug from the outlet. Grip plug and pull from outlet. Check the power
cord and plug for damage. A damaged cord or plug must be repaired before using the humidifier.
6
WEEKLY MAINTENANCE CLEANING & CARE
IMPORTANT:
• Unplug the power cord before cleaning.
• NEVER use any cleaning products/solutions which are abrasive, corrosive or flammable, as
these can be harmful to the unit and void warranty if used.
Cleaning Instructions
1. Clean base every week for optimum performance.
a. Fill the base 4-oz of undiluted white vinegar.
b. Let the solution stand for 20 minutes.
c. With the vinegar in the base, clean all the interior surfaces with a soft cloth or brush to
help remove scales. Do not touch the nebulizer with fingers. Any residue on the nebulizer
will reduce mist output.
d. Carefully rinse with clean, warm water and gently wipe clean.
2. Regularly clean the outer surface with a damp, soft cloth to prevent dust accumulation.
3. Discard and replace water bottle when signs of wear are evident.